Summary: The Flush End Cap for 2-inch OD Tubing is a press-fit end cap from Lavi Industries that closes a 2-inch OD guard rail or bar rail with a flat face flush to the tube. Part number 00-600/2 fits .050-inch and .060-inch wall tubing and is tapped into the tube end with a rubber mallet. It is offered in polished brass, polished 304 stainless, satin 304 stainless, polished 316 stainless, and satin 316 stainless. At 2 inches it is the standard bar rail end cap, closing a foot rail where the run ends at a wall or bar face. It also finishes 2-inch guard rails and cap-rail support tubes in lobbies, atriums, and exterior stairs. The 316 finishes are the choice for salt air and chlorine exposure. Ships from US inventory.
Key specs: SKU=00-600/2; Tubing OD=2"; Materials/Finishes=Polished Brass, 304 Polished SS, 304 Satin SS, 316 Polished SS, 316 Satin SS; Mechanism=Inside-fit press-fit plug; flat face flush with tube OD
Flush End Cap for 2-inch OD Tubing
Guard rails and cap-rail runs at 2" OD finish with the same flush treatment: a press-in cap that sits flat to the tube end with nothing protruding. The result is a terminus that disappears into the rail itself. In polished brass, 304, or 316 polished or satin stainless to carry the finish through.
