Summary: The Flush End Cap for 1-inch OD Tubing is a press-fit railing end cap from Lavi Industries that closes a 1-inch OD tube end with a flat face that sits flush with the tube. Part number 00-600/1 seats inside tubing with a .050-inch wall and stands only 1/8 inch proud of the cut. It is offered in polished brass, polished 304 stainless, and satin 304 stainless. The cap is cosmetic and carries no load. It finishes small handrails, display rails, and shop-fixture runs where the rail should end without ornament. The 600/1H and 600/2 are the same cap for 1.5-inch and 2-inch tubing, and all three ship from US inventory. The 602/1 Rounded End Cap gives the same 1-inch tube a domed close.
Key specs: SKU=00-600/1; Tubing OD=1"; Materials/Finishes=Polished Brass, 304-Grade Polished Stainless Steel, 304-Grade Satin Stainless Steel; Mechanism=Inside-fit press-fit plug; flat face flush with tube OD
Flush End Cap for 1-inch OD Tubing
The Flush End Cap presses in flat with a 1" OD tube end and closes the run with nothing protruding — no edge to catch clothing or hands. Stair rails, small handrails, and shop-fixture runs all finish with the same clean stop. Choose polished brass, 304 polished stainless, or 304 satin stainless to match the tube.
