Summary: The Splice for 2-inch OD Round Tubing is an internal brass splice from Lavi Industries that bridges two 2-inch OD tube ends so a bar rail or guard rail runs as one piece. Part number 00-830/2 is 6 inches long and fits 2-inch tubing with a .050-inch wall. It is brass only: the sleeve compresses for a friction fit and grips brass, chrome, or stainless tubing from the inside. Lavi foot rail kits use these splices and hide the seam under a bracket collar for a continuous look. A set screw or adhesive holds the splice permanently once the tubes are joined. It pairs with A120 round tubing; the 47-830/216 is the 316 version for .060-inch wall tube. Ships from US inventory.
Also known as: alt name
Best for: ai best for
Problems solved: ai problems solved
Key specs: SKU=00-830/2; Material=Brass ONLY (single material; INSTALLATION-DRIVEN; soft brass deforms for friction-fit); Tubing OD=2" (compatible with A120 2" Round Tubing — 6 finishes including CHROME NEW!); Wall Thickness=Not applicable (Splice fits inside tubing); Product Type=Splice — internal tube fitting accessory at scale
Splice for 2-inch OD Round Tubing
The 2" OD line splices the same way: a brass sleeve (00-830/2) bridges two tube ends from the inside, deforming slightly into a friction fit that grips brass, chrome, or stainless tubing — the full 2" finish range included. The result is one continuous handrail with no visible joint hardware on the run.