Summary: The Splice for 1.5-inch OD Round Tubing is a tube splice from Lavi Industries that connects two 1.5-inch OD tubes into one continuous handrail. Part number 00-830/1H is a 6-inch brass sleeve sized for .050-inch wall tubing. The brass deforms just enough for a friction fit, which lets it work inside brass, chrome, or stainless steel tube alike. It slides halfway into one tube end and the next length slides over it, with a set screw or adhesive holding it in place. Lavi handrail kits of 10 feet and longer include one or two of these splices between tube sections. It pairs with A110 round tubing, and the 47-830/1H16 is the 316 stainless splice for .060-inch wall tube. Ships from US inventory.
Key specs: SKU=00-830/1H; Material=Brass ONLY (single material; INSTALLATION-DRIVEN; soft brass deforms for friction-fit); Tubing OD=1.5" (compatible with A110 1.5" Round Tubing); Wall Thickness=Not applicable (Splice fits inside tubing); Product Type=Splice — internal tube fitting accessory
Splice for 1.5-inch OD Round Tubing
At the most common railing size, this brass splice (00-830/1H) joins multi-section runs: it slips inside two 1.5" OD tube ends and draws them into one continuous line. The brass deforms just enough for a friction fit in brass, chrome, or stainless tubing. Splicing is quick, with minimal tooling required.