Ball Center Short Post for 2-inch OD Tubing

Description

Keep a long run of heavier 2-inch OD brass tubing steady through the middle, not just at the ends. The horizontal brass tube passes through the ball at the center of this intermediate post, adding mid-support so a wide brass grab bar or long brass rail holds firm end to end. Polished brass, sized for 2-inch OD tube.

Description

For a wall-mounted run of 2-inch OD brass tubing that's too long for end posts alone, this Ball Center Short Post carries the middle. The brass tube passes through the ball at the center of the post, giving solid mid-support for longer brass grab bars, brass handrail runs, and heavier decorative rails where the extra tube diameter needs backing along the span. Cast in polished brass with a decorative ball at the joint, it matches the ball-end posts that cap each end of the run, so the whole line stays visually consistent. It pairs with the 330-2 ball-end posts at each terminus, letting a brass run of any length go together from one matching family. Polished brass is the finish offered at this OD.