Summary: The 135° Flush "T" Elbow for 2-Inch OD Tubing is a solid brass three-outlet flush fitting from Lavi Industries that turns a 2-inch OD rail through 135 degrees while a third tube meets the joint at 90 degrees. Part number 00-738/2 fits .050-inch wall tubing and measures 2-7/8 inches wide. The catalog lists it as the flush 135-degree side outlet ell. It is offered in polished brass only, so it matches an existing brass rail on a restoration. Its sleeves enter the tube ends, so the angled run and the branch come together without a welded joint. It serves pre-war hotel stair landings and civic buildings where the original layout used angles other than 90 degrees. Ships from US inventory.
Key specs: Mechanism=135° Flush "T" Elbow — 3-outlet T-junction with through-pass at 135° obtuse angle (rather than 90° or 180°) + perpendicular branch; Tubing OD=2" (US commercial standard); Materials=1 finish — Polished Brass only (no stainless steel; heritage restoration matching only); SKU=00-738/2 (00- prefix = brass-only heritage specialty family); Mechanism Category=3-OUTLET ANGLED T — non-orthogonal heritage geometry (distinct from 733/734 orthogonal T-elbows); for pre-1940 hexagonal/octagonal/pentagonal architectural geometry
135° Flush "T" Elbow for 2-Inch OD Tubing
The 00-738/2 handles a non-square turn with a branch attached: two 2" OD tubes run straight through at a 135° angle while a third meets the joint perpendicular. This three-outlet fitting comes in Polished Brass to match an existing brass rail where a stair or landing turns at a wide angle. Fits .050"-wall tubing.